01Define the process requirement
Specify alloy, thickness, surface condition and later operations. The laser equipment and process teams should confirm gas choice together. Different materials and cutting strategies require different pressures and flows; provide common part programs and quality targets.
- Project input: Aluminium alloy and thickness
02Connect the source to the use point
Assess stable generation separately from peaks, then check boosting and storage against continuous orders. Match particle, water and oil limits to the equipment. An acceptable nitrogen percentage does not establish cleanliness at the cutting-head gas circuit.
- Interface input: Subsequent processing requirements
03Validate the result and scope
Compare representative thin and thick parts, recording edges, burrs and downstream results. Validate mixed-gas options separately; steel or other alloy settings cannot transfer automatically. Calculate cost using actual gas consumption and complete station electricity.
For a project assessment, provide aluminium alloy and thickness, subsequent processing requirements, cutting strategy and quality assessment. These inputs define comparable equipment scope and acceptance conditions. This page is application-planning guidance, not a customer case or a claim of completed work.
- Validation input: Cutting strategy and quality assessment
These public references explain general technology. They do not establish AIDEKE model performance, a supply commitment or a third-party endorsement. The article is an independent editorial explanation; the confirmed technical agreement governs a specific project.
Sources and usage notes