01Describe the biological load
Provide stock, biomass, feeding pattern, water temperature and measured dissolved-oxygen trends to the aquaculture designer. Peak oxygen demand can differ from the daily average. Include credible interruptions and the consequences of losing the normal supply.
02Include the transfer system
Oxygen produced at the generator must reach the water through suitable equipment. Transfer performance depends on the installation and operating conditions. Obtain the required gas flow, concentration and pressure from the complete oxygenation design rather than sizing only from an electrical power figure.
03Verify both systems
Accept the generator against its gas-delivery specification and assess water conditions through the farm's monitoring plan. Test the approved backup arrangements. A satisfactory oxygen concentration at the package outlet does not prove that every tank or pond has adequate dissolved oxygen.
These public references explain general technology. They do not establish AIDEKE model performance, a supply commitment or a third-party endorsement. The article is an independent editorial explanation; the confirmed technical agreement governs a specific project.
Sources and usage notes