Compressed air supply for gas generation
Select the source around complete station demand and separator inlet requirements.
Manufacturer reference photo · fsair.cn01Define the operating duty
Start from inlet pressure, temperature, flow and quality. Include dryer regeneration, filter losses and other users. With a shared factory station, establish capacity actually available to generation instead of adding compressor nameplates.
- Demand input: Separation-unit inlet specification
02Connect the complete system
Decide between dedicated and shared sources before controls, backup and metering. Shared systems need review of sudden workshop demand. Dedicated sources require complete power, cooling, drainage and service-space assessment.
- Interface input: Available shared capacity; Compressor control mode
03Verify the configuration
Measure conditions at the generator inlet during steady and peak operation and record total power. Air-source faults affect separation and quality, so pressure, temperature and drainage need explicit checks and alarm arrangements.
This topic describes station auxiliaries. Confirm compatibility, quantities and supply boundaries against the system diagram. The fields below collect project requirements and do not represent a fixed model rating.
- Verification input: Power and heat-rejection conditions
Selection conditions to confirm
| Item | Requirement / confirmation basis |
|---|---|
| Separation-unit inlet specification | Confirm for the projectProvide actual process conditions and the measurement basis. |
| Available shared capacity | Confirm for the projectSpecify normal values, peaks or the permitted range. |
| Compressor control mode | Confirm for the projectCheck against existing equipment and site conditions. |
| Power and heat-rejection conditions | Confirm for the projectAgree the acceptance basis during technical review. |
These public references explain general technology. They do not establish AIDEKE model performance, a supply commitment or a third-party endorsement. The article is an independent editorial explanation; the confirmed technical agreement governs a specific project.
Sources and usage notes