Nitrogen and oxygen metering
Use consistent gas and electricity boundaries for selection and operating decisions.
Manufacturer reference photo · sjjq.com01Define the operating duty
Specify actual volume, reference-condition volume or mass flow, with reference conditions in every report. Select around minimum, normal and peak demand. A peak-only range may fail to identify small overnight consumption.
- Demand input: Units and reference conditions
02Connect the complete system
Check gas compatibility, pressure, temperature, straight runs and compensation. To evaluate generation cost, measure total station electricity and qualified gas consistently. Off-specification startup discharge should not be counted as useful production.
- Interface input: Flow range; Installation conditions
03Verify the configuration
Check agreement of instantaneous flow, cumulative volume and timestamps in real operation. Include maintenance, spare parts and backup gas in costs. Metering provides evidence; nameplate motor power alone cannot establish actual unit supply cost.
This topic describes station auxiliaries. Confirm compatibility, quantities and supply boundaries against the system diagram. The fields below collect project requirements and do not represent a fixed model rating.
- Verification input: Electricity and product-gas boundaries
Selection conditions to confirm
| Item | Requirement / confirmation basis |
|---|---|
| Units and reference conditions | Confirm for the projectProvide actual process conditions and the measurement basis. |
| Flow range | Confirm for the projectSpecify normal values, peaks or the permitted range. |
| Installation conditions | Confirm for the projectCheck against existing equipment and site conditions. |
| Electricity and product-gas boundaries | Confirm for the projectAgree the acceptance basis during technical review. |
These public references explain general technology. They do not establish AIDEKE model performance, a supply commitment or a third-party endorsement. The article is an independent editorial explanation; the confirmed technical agreement governs a specific project.
Sources and usage notes